A Touc24s.vnad or ClickPad is a pointing device with a touch-sensitive surface located on the palm rest of the notebook. You can adjust the sensitivity of the Touc24s.vnad or ClickPad, enable or disable the features and gestures, and change the functionality of the buttons.

Touc24s.vnads have a touch-sensitive area bordered by two or more buttons that function like the left và right buttons on an external mouse.

ClickPads have unmarked areas for left và right clicking, instead of discrete buttons lượt thích on the Touc24s.vnad. Lớn right-click using a ClickPad, press the bottom right corner. To lớn left-click, tap anywhere on the ClickPad, or press the bottom left corner.


Note:

24s.vn recommends periodically checking for software, drivers, & system BIOS updates to ensure you get the maximum functionality out of your notebook & pointing device. See the section Run Windows Update (Windows 10) in this document, or the 24s.vn document 24s.vn PCs - Downloading or Updating Software and Drivers.


Example Touc24s.vnad

*

Touch-sensitive area

Left Touc24s.vnad button

Right Touc24s.vnad button


Example ClickPad with click zones

*

Left-click zone

Right-click zone


Common navigation gestures


The most commonly used Touc24s.vnad và ClickPad actions are gesture-based and provide shortcuts for quickly navigating in & working with windows and files. Most models và software can perform all the gestures listed. In some cases these features are disabled in the software, và only need to be enabled or configured.


Common navigation gestures & their descriptions

Gesture

Description


*

Swipe your finger across the surface khổng lồ move the cursor on the screen.

Bạn đang xem: Mở chuột cảm ứng laptop hp


*

Tap once to lớn single-click & twice lớn double-click the cursor.


*

To rotate an image or portion of the screen, place two fingers on the Touc24s.vnad and then rotate them.

Rotation only works in those applications that already have a rotate function, such as a photo browser.


*

To drag-and-drop an item, tap twice to select the item, swipe your finger to lớn move it, & then lift your finger to lớn release it.


*

To scroll a window, a screen, or a list, place two fingers on the Touc24s.vnad, then swipe them from side lớn side or up and down. Lift your fingers to stop scrolling.


To zoom-in or -out while working in a window, place two fingers on the surface and move them outward khổng lồ zoom-in & inward to lớn zoom-out.

Zooming only works in those applications that already have zoom functions, such as a photo browser or word processor.


Disabling the Touc24s.vnad or ClickPad in Windows


Disable the Touc24s.vnad or ClickPad when an external USB mouse is attached. You can also add a Touc24s.vnad icon to the taskbar for quick access to lớn settings.


Note:

If the option to disable the touc24s.vnad is not available, download and install the latest touc24s.vnad driver from Windows Update. For more information, see Run Windows Update (Windows 10).


In Windows, tìm kiếm for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


To disable the Touc24s.vnad when using a USB mouse, kiểm tra Disable external pointing device when external USB pointing device is attached.


Under Tray Icon, select if and how the touc24s.vnad icon is displayed in the taskbar.


Click Apply > OK.


Configuring the Touc24s.vnad or ClickPad settings in Windows


Touc24s.vnad và ClickPad configuration options are located on the Touc24s.vnad properties page. Use the following steps to xuất hiện the properties page và enable or disable individual settings.

In Windows, tìm kiếm for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


Click the Touc24s.vnad or ClickPad Settings tab . If you have a Synaptics device, the tab includes the Synaptics icon

*
.

Click Settings or ClickPad Settings.


Adjust the settings for scrolling, clicking, sensitivity, edge behaviors, & gesture actions to lớn suit your personal preferences.


Note:

Not all notebooks use a Synaptics Touc24s.vnad or ClickPad; however, all Touc24s.vnads have similar features và configuration options.


The Properties window is divided into three areas to lớn help you with Touc24s.vnad or ClickPad configuration.


The left side of the window lists gestures and actions. Click to lớn highlight individual gesture or action. When highlighted, select the Help icon to find out more information or select the Settings icon lớn change the settings.

The lower-right side shows the finger movement associated with the gesture or action.

The upper-right side shows the on-screen response to lớn the finger movements.


Turn on or off individual gestures by clicking the checkbox next khổng lồ each item. A checkmark in the checkbox indicates that gesture is enabled.

Click Apply > OK.


Button clicking using a Touc24s.vnad or ClickPad


Enable or disable individual gestures on the Touc24s.vnad or ClickPad by clicking the checkbox next khổng lồ each item. A checkmark in the checkbox indicates that gesture is enabled.

The Touc24s.vnad has dedicated left- và right-click buttons give you the same functionality as the buttons on an external pointing device.

The ClickPad uses the lower-left and lower-right side of the pad as the left- và right-click buttons. You can also tap & drag an vật phẩm in the same way as you click và hold the left button on an external pointing device to drag an thành tựu around the screen.


Customizing left- and right-click on a Touc24s.vnad or ClickPad in Windows


By default, the left và right buttons on a Touc24s.vnad (or the bottom-left & -right areas on a ClickPad) function as left-click and right-click buttons. You can customize button clicks from the Touc24s.vnad Properties page. Use the following steps khổng lồ customize the buttons.


Note:

Depending on your computer mã sản phẩm and its configuration, the options in this section might vary slightly.


In Windows, tìm kiếm for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


Click the Buttons tab. Under Button configuration, you can make selections to customize the button functions.


Click Apply > OK.


Customizing clicking on a ClickPad


You can customize actions for finger clicks or the area form size for right-clicks from the ClickPad Properties page. Use the following steps lớn adjust and customize clicking.

In Windows, tìm kiếm for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


Click ClickPad Settings.


Click to highlight Clicking. If the checkbox next to Clicking does not contain a kiểm tra mark, click the checkbox until a check mark displays to lớn enable clicking.


Click the Settings icon khổng lồ adjust clicking settings.


Customize one-finger, two-finger, three-finger, và corner click actions by clicking on the down icon to xuất hiện the click action menu for each item. Scroll through the menu to make your selection. Some selections required additional information. If the Configure button is enabled after your selection, click Configure and follow the instructions.

Click the Close button.

Click the down icon next lớn Clicking, và then click Right Button Zone.

Click the Settings icon lớn adjust the right-click button zone.


A window displays showing a green area where the ClickPad recognizes a right-click.


Hover the cursor over the small black dot on the left side of the green box until a double-sided arrow displays, và then drag the mouse left khổng lồ expand the right-click zone.


Click Close khổng lồ return to lớn the ClickPad properties.

Click Apply > OK khổng lồ apply your changes and exit the properties screen.


Customizing tapping gestures on a ClickPad


Single- và double-tap gestures mimic the single- & double-click behavior on an external pointing device. Use the following steps lớn adjust và customize tapping.

In Windows, search for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


Click ClickPad Settings.


Click khổng lồ highlight Tapping. If the checkbox next to Tapping does not contain a kiểm tra mark, click the checkbox until a check mark displays lớn enable clicking.


Click the Settings icon to lớn adjust the tapping settings. You can make the following adjustments:


Tap & Drag: Adjusts how you use the Touc24s.vnad lớn drag items on the computer screen.

Touc24s.vnad Disable Zones Settings: Allows using tapping khổng lồ enable or disable the Touc24s.vnad

Top Left Action: Adjusts the length of time the Touc24s.vnad is disabled.


Click Close to lớn return to the ClickPad properties.

Click Apply > OK lớn apply your changes & exit the properties screen.


Scrolling using a Touc24s.vnad or ClickPad


Dedicated horizontal và vertical scroll gestures allow you to scroll inside a window. You can customize & adjust how you scroll using one finger or two fingers và how the Touc24s.vnad or ClickPad responds khổng lồ gestures near the edge.


Adjusting single-finger scrolling


Use the following steps to lớn adjust your Touc24s.vnad or ClickPad for one-finger scrolling.

In Windows, tìm kiếm for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


Click ClickPad Settings.


Click to lớn highlight Scrolling. If the checkbox next to Scrolling does not contain a kiểm tra mark, click the checkbox until a check mark displays to enable clicking.


Click the Settings icon to lớn adjust the scrolling settings. You can make the following adjustments:


Scrolling speed: Adjusts the speed of scrolling.

Set Scrolling Region: Adjusts the kích cỡ of the scrolling region. The scrolling region is defined by the cross-hatched area. Click & drag the small đen squares to lớn make the region larger or smaller.

Enable vertical scrolling: Allows scrolling by sliding your finger up or down the left side of the Touc24s.vnad in the left side scrolling region.

Enable horizontal scrolling: Allows scrolling by sliding your finger along the lower edge of the Touc24s.vnad in the lower scrolling region.

Enable ChiralScrolling: Allows scrolling continuously with one, smooth, circular motion on the Touc24s.vnad.

Enable EdgeMotion when scrolling: Continues scrolling when your finger reaches the edge of the Touc24s.vnad.

Enable Coasting - Continues scrolling after you lift your finger off the Touc24s.vnad.


Click Close to lớn return lớn the ClickPad properties.

Click Apply > OK lớn apply your changes và exit the properties screen.


Adjusting two-finger scrolling


Two-finger scrolling allows you lớn scroll vertically or horizontally from anywhere on the Touc24s.vnad surface, not just the designated scrolling area. Use the following steps lớn enable & customize two-finger scrolling.

In Windows, search for touc24s.vnad.

From the results list, click Touc24s.vnad settings.

In the Touc24s.vnad window, click Additional settings.


Click ClickPad Settings.


Two-Finger Scrolling is located under MultiFinger Gestures. If you vị not see Two-Finger Scrolling, click the arrow icon lớn the left of the MultiFinger Gestures checkbox.

Click to lớn highlight Two-Finger Scrolling. If the checkbox next lớn Two-Finger Scrolling does not contain a kiểm tra mark, click the checkbox until a kiểm tra mark displays to enable clicking.


Click the Settings icon khổng lồ adjust the scrolling settings. You can make the following adjustments:


Scrolling speed: Adjusts the tốc độ of scrolling.

Enable vertical scrolling: Allows scrolling by sliding your fingers up or down the Touc24s.vnad.

Enable horizontal scrolling: Allows scrolling by sliding your fingers left or right on the Touc24s.vnad.

Enable reverse scrolling direction: Changes the direction of scrolling.

Enable EdgeMotion when scrolling: Continues scrolling when your fingers reaches the edge of the Touc24s.vnad.

Enable Coasting - Continues scrolling after you lift your fingers off the Touc24s.vnad.


Click Close to lớn return to lớn the ClickPad properties.

Click Apply > OK lớn apply your changes & exit the properties screen.


Navigating using multi-finger gestures


MultiFinger gestures provide shortcuts lớn frequently used applications or easy navigation within an application.

To customize these gestures from the ClickPad Properties page, click the arrow icon khổng lồ the left of the MultiFinger Gestures checkbox to open the MultiFinger options. If the checkbox next lớn MultiFinger Gestures does not contain a kiểm tra mark, click the checkbox until a kiểm tra mark displays.


Enabling pinch zoom


Zooming in và out is available within many applications. The pinch zoom gesture can be enabled from the ClickPad Properties page.

Click khổng lồ highlight Pinch Zoom. If the checkbox next lớn Pinch Zoom does not contain a check mark, click the checkbox until a kiểm tra mark displays lớn enable clicking.


Click the Settings icon to mở cửa a window that allows you khổng lồ control response lớn pinch zooming.


Click Close khổng lồ return khổng lồ the ClickPad properties.

Click Apply > OK lớn apply your changes và exit the properties screen.


Enabling rotating


Rotating is available for some objects và for photos. The rotate gesture can be enabled from the ClickPad Properties page.

Click to lớn highlight Rotating. If the checkbox next lớn Rotating does not contain a check mark, click the checkbox until a kiểm tra mark displays to enable clicking.


Click the Settings icon to mở cửa a window that allows you to lớn select rotating options. TwistRotate allows you lớn turn items lượt thích photos using two fingers in a motion similar lớn turning a knob. Rotate turns items in 90-degree increments.


Click Close to lớn return khổng lồ the ClickPad properties.

Click Apply > OK lớn apply your changes và exit the properties screen.


Navigating within applications using three-finger flick


The three-finger flick gesture can be configured khổng lồ navigate within applications. Three-finger flick is used lớn browse the internet or scroll through photos. Use the following the steps to lớn enable three-finger flick from the ClickPad Properties page.

Click khổng lồ highlight Three-Finger Flick. If the checkbox next khổng lồ Three-Finger Flick does not contain a kiểm tra mark, click the checkbox until a kiểm tra mark displays to enable clicking.


Note:

For more information about three-finger flick, click the Help icon next lớn Three-Finger Flick.


Click Apply > OK to lớn apply your changes & exit the properties screen.


Enabling the three-finger press gesture


Three-finger press can be used khổng lồ navigate between applications. Three-finger press opens identified applications when enabled. The three-finger press gesture can be enabled from the ClickPad Properties page.

Click to highlight Three-Finger Press. If the checkbox next to lớn Three-Finger Press does not contain a check mark, click the checkbox until a check mark displays lớn enable clicking.


Click the Settings icon to lớn select programs that mở cửa when you use a three-finger press.


Click Close to return to lớn the ClickPad properties.

Click Apply > OK khổng lồ apply your changes & exit the properties screen.


Enabling the four-finger flick gesture


Four-finger flick can be used to lớn switch between applications, minimize a window, or restore a window. The four-finger flick gesture can be enabled from the ClickPad Properties page.

Click lớn highlight Four-Finger Flick. If the checkbox next lớn Four-Finger Flick does not contain a kiểm tra mark, click the checkbox until a kiểm tra mark displays khổng lồ enable clicking.


Click the Settings icon lớn choose four-finger flick options. Enable or disable either horizontal or vertical flicks. When enabled:


Note:

For more information about four-finger flicks, click Help.


A Four-Finger Horizontal Flick to lớn the right opens the applications switcher.

A Four-Finger Horizontal Flick lớn the left opens the previously used application.

A Four-Finger Vertical Flick downward minimizes or restores the window on your desktop.

A Four-Finger Vertical Flick upward opens the application switcher.


Click Close to lớn return to lớn the ClickPad properties.

Click Apply > OK lớn apply your changes and exit the properties screen.


Enabling edge swipe


Edge swipes allow you to switch applications or navigate on the Start screen. The edge swipe gesture can be enabled from the ClickPad Properties page.

To enable edge swipe, click the checkbox next to Enable Edge Swipe until a kiểm tra mark is displayed. Once enabled, a swipe toward the center of the Touc24s.vnad does the following:


From the left edge, switches lớn the previously xuất hiện application.

From the right edge, opens or closes the Charms bar.

From the vị trí cao nhất edge, opens or closes the application bar.


Adjusting Touc24s.vnad or ClickPad pointing settings


Pointing settings allow you lớn adjust how the pointer moves in response khổng lồ your gestures. Pointing includes Sensitivity, Momentum, EdgeMotion, & Accessibility features.

To customize these gestures from the ClickPad Properties page, click the arrow icon lớn the left of the Pointing checkbox to mở cửa the Pointing options.


Changing the Touc24s.vnad or ClickPad sensitivity settings


The Sensitivity options allow you lớn adjust the responsiveness of the touc24s.vnad to the pressure of your touch. You can open the sensitivity settings from the ClickPad Properties page.

Click to lớn highlight Sensitivity.


Click the Settings icon to xuất hiện a window that allows you to lớn control how much finger pressure must be applied before the Touc24s.vnad responds.


Click Close to lớn return to the ClickPad properties.

Click Apply > OK to lớn apply your changes và exit the properties screen.


Changing the Touc24s.vnad or ClickPad momentum settings


The Momentum options provides trackball-like responsiveness from the Touc24s.vnad. You can xuất hiện the momentum settings from the ClickPad Properties page.

Click khổng lồ highlight Momentum. If the checkbox next to lớn Momentum does not contain a kiểm tra mark, click the checkbox until a kiểm tra mark displays to lớn enable clicking.


Click the Settings icon to open a window that allows you lớn control how far the pointer glides và whether it stops at the screen edge or bounces back.


Click Close khổng lồ return lớn the ClickPad properties.

Click Apply > OK to lớn apply your changes và exit the properties screen.


Changing edge behavior when scrolling


Scrolling behavior at the edge of the Touc24s.vnad is controlled within the scrolling settings pages. You can enable or disable EdgeMotion when scrolling. When enabled, EdgeMotion simplifies long-distance pointer motions. When you reach the edge of the Touc24s.vnad, the pointer continues to lớn move until you lift your fingers off the Touc24s.vnad. From the ClickPad Properties page, customize EdgeMotion using the following steps.

Click to lớn highlight EdgeMotion. If the checkbox next lớn EdgeMotion does not contain a check mark, click the checkbox until a kiểm tra mark displays khổng lồ enable clicking.


Click the Settings icon khổng lồ adjust the edge scrolling settings. You can make the following adjustments:


EdgeMotion: Enables or disables EdgeMotion for specific tasks. Choose to use EdgeMotion always, or only when using the tap-and-drag gesture.

EdgeMotion Region: Adjusts the kích thước of the edge regions. The edge is defined by the cross-hatched area. Make the edge regions larger or smaller by clicking and dragging the small đen squares.

EdgeMotion Speed: Controls the tốc độ of the edge scrolling. Use the slider lớn adjust the speed.


Click Close to lớn return to the ClickPad properties.

Click Apply > OK to apply your changes và exit the properties screen.


Changing the Touc24s.vnad or ClickPad accessibility settings


The Accessibility options allow you khổng lồ specify & limit how the pointer responds. You can mở cửa the accessibility settings from the ClickPad Properties page.

Click to highlight Accessibility.


Click the Settings icon to open a window that allows you to lớn adjust the following accessibility features:


Sticky Borders: Restricts the pointer to lớn the active window.

Slow Motion: Reduces the tốc độ of the pointer for improved accuracy. Select your choice of Either Shift Key or Ctrl Key lớn enable or disable Slow Motion.

Constrained Motion: Limits pointer motion lớn purely horizontal or vertical. Select your choice of Either Shift Key or Ctrl Key to lớn enable or disable Constrained Motion.


Click Close lớn return lớn the ClickPad properties.

Click Apply > OK khổng lồ apply your changes & exit the properties screen.


Turning all Touc24s.vnad or ClickPad gestures off or on


If you want the Touc24s.vnad or ClickPad to function lượt thích a standard notebook mouse that does not use gestures, you can turn off these features.


To turn all gestures off:


From the taskbar, find and right-click the ClickPad icon, or other pointing device icon in the Windows system tray.


Uncheck Enable Gestures.


To turn gestures back on, replace the kiểm tra by Enable Gestures in the pop-up menu.


Troubleshooting the Touc24s.vnad or ClickPad


There are several options for troubleshooting your Touc24s.vnad or ClickPad when it is not working. Use the following procedures, until a solution is found.


Turning the Touc24s.vnad off and then on


On some Touc24s.vnads, you can turn on or off the Touc24s.vnad by double tapping in the upper-left corner of the Touc24s.vnad.

Double-tap to turn the Touc24s.vnad off.


Repeat to turn the Touc24s.vnad on.


Power reset a máy tính with removable battery


Perform a power reset on your notebook with a removable battery.


Turn off the computer, and then unplug the power cord.

Disconnect any peripheral devices, & then remove the computer from any port replicator or docking station.

Remove the battery from the computer.

With the battery and power cord unplugged, press và hold the power nguồn button for approximately 15 seconds.

After you drain the capacitors, re-insert the battery, and then plug in the power nguồn cord. Leave peripheral devices disconnected.

Turn on the computer.


Power reset a máy vi tính with a non-removable battery


Perform a power reset on your notebook with a non-removable battery.


Turn off the computer, and then unplug the power cord.

Disconnect any peripheral devices, và then remove the computer from any port replicator or docking station.

With the nguồn cord unplugged, press and hold the nguồn button for approximately 15 seconds.

After you drain the capacitors, plug in the nguồn cord. Leave peripheral devices disconnected.

Turn on the computer.


Perform a Windows 10 system reset


If the issue persists, recover the computer back khổng lồ its original configuration.

Microsoft provides a reset feature that repairs your computer by reinstalling the operating system. Before using this option, make sure you back up all your important files.

Go lớn 24s.vn PCs - Reset the computer for more information.


Finding driver updates on the 24s.vn website


Learn how to lớn find driver updates on the 24s.vn website.


24s.vn provides many không tính tiền software & driver downloads.


Note:

For devices with Windows 10 in S mode, you can only get drivers through Windows Update. Go to 24s.vn PCs - Frequently Asked Questions about Windows 10 in S Mode for more information.


If a Let"s identify your hàng hóa to get started page displays, click máy vi tính or Desktop.

Type the mã sản phẩm name for your computer in the Or, enter your serial number field, và then click Submit. For example, type Pavilion 24s.vnE h8-1360t Desktop, và then click Submit.


If a Matching products webpage opens, select your model number from the list.

The software results page for your computer displays with the default operating system selected. If you need to change the operating system, click Change, select your version, & then click Change.


Note:

If the operating system you want is not on the list, 24s.vn does not have drivers for that operating system. Use a different method to tải về software và drivers.


From the list of available software và driver categories, click the category name, & then click Download.


CAUTION:

Sometimes there is more than one tải về available for a component, such as several DVD firmware updates. If this happens, identify the component installed in your computer, và then download the appropriate file. Lớn find the name of a component, tìm kiếm for and xuất hiện Device Manager. Find the component, & then expand the category (for example, DVD/CD ROM drives). The category lists the component’s original manufacturer name.


Follow the on-screen instructions to lớn install the software or driver.


Run Windows Update


Update your Windows 11 or Windows 10 computer using Windows Update.


In Windows, tìm kiếm for và open kiểm tra for updates.


If there are any available updates, they begin automatically.


After the updates install, restart your computer when prompted.


Perform a System Restore khổng lồ resolve an issue in Windows


If the issue is recent, restore the computer to lớn a point before the problem began, to resolve the issue.

Go to 24s.vn PCs - Using Microsoft System Restore for more information.


Z7_3054ICK0KGTE30AQO5O3KA3016

24s.vn-feedback-input-portlet

Actions
$title
Loading...
Z7_3054ICK0KGTE30AQO5O3KA30H4

24s.vn-feedback-banner-portlet

Actions
$title
Loading...
Z7_3054ICK0KGTE30AQO5O3KA30H5

24s.vn-country-locator-portlet

Actions
$title
Loading...
Country/Region:Hong Kong SAR

Select a location


Americas


Europe, Middle East, Africa


Asia Pacific và Oceania


Select a language


Confirm Back
Z7_M0I02JG0KOT530A6KJKFRQ0816

24s.vn-detect-load-my-device-portlet

Actions
$title
Loading...
Z7_M0I02JG0KONJ30ACBBF8MM1084

24s.vn-hero-24s.vn-search

Actions
$title
Loading...
Search all 24s.vn
&resultLimit=10&store=tmsstore&languageCode=en&filters=class:(pm_series_value%5E1.1 OR pm_name_value OR pm_number_value) and (NOT hiddenproduct:yes OR (!_exists_:hiddenproduct)) &printFields=tmspmnamevalue,title,body,childnodes,class,productid,seofriendlyname,shortestnavigationpath"/> Cancel
Examples: "DeskJet 2130 paper jam", "EliteBook 840 G3 bios update"

Search help


Tips for better search results Ensure correct spelling and spacing - Examples: "paper jam"Use product mã sản phẩm name: - Examples: laserjet pro p1102, DeskJet 2130For 24s.vn products a hàng hóa number. - Examples: LG534UAFor Samsung Print products, enter the M/C or model Code found on the product label. - Examples: “SL-M2020W/XAA”Include từ khóa along with sản phẩm name. Examples: "DeskJet 2130 paper jam", "EliteBook 840 G3 bios update" Need help finding your product name or product number?

Finding your Serial Number Finding your sản phẩm Number


Loading Results
Need help?
Some features of the tool may not be available at this time. We apologize for this inconvenience and are addressing the issue.Minimize Chat bot windowLoading ChatbotNew Message
*
The Virtual Agent is currently unavailable. Please try again shortly.
Need help troubleshooting? Just ask.
24s.vn"s Virtual Agent can help troubleshoot issues with your PC or printer.

Xem thêm: Cách Xem Tất Cả Bình Luận Của Người Khác Trên Facebook


Try asking 24s.vn"s Virtual Agent.

Session timed out


Your session on 24s.vn Customer tư vấn has timed out. Please sign back in to continue